rp 550 graphite electrode

Pubdate: 08-10 2021

What are the reasons why rp 550 graphite electrode is popular in the market?

rp 550 graphite electrode

What are the reasons why rp 550 graphite electrode is popular in the market? rp 550 graphite electrode has the advantages of simple processing, high removal rate of EDM, and low graphite loss.

Therefore, some customers of group-based spark machine abandoned the copper rp 550 graphite electrode and switched to the rp 550 graphite electrode. In addition, some special-shaped rp 550 graphite electrodes cannot be made of copper, but graphite is easier to form. The copper rp 550 graphite electrode is too heavy to process large rp 550 graphite electrodes. These factors have caused some group-based spark machine customers to apply rp 550 graphite electrode. . The rp 550 graphite electrode is easy to process, and the processing speed is significantly faster than that of the copper rp 550 graphite electrode.

For example, when using milling to process graphite, the processing speed is 2-3 times faster than other metals, and no additional manual processing is required, while the copper RP 550 graphite electrode requires manual grinding. Similarly, if a high-speed graphite machining center is used to manufacture the rp 550 graphite electrode, the speed will be faster, the efficiency will be higher, and there will be no dust problems. In these processes, choosing the right hardness tool and graphite can reduce tool wear and copper damage. Comparing the grinding time of rp 550 graphite electrode and copper rp 550 graphite electrode, graphite is 67% faster than copper rp 550 graphite electrode.

In EDM, the machining time of the rp 550 graphite electrode is 58% faster than that of the copper rp 550 graphite electrode. In this way, the processing time is greatly shortened, and the manufacturing cost is reduced. The design of the rp 550 graphite electrode is different from the traditional copper rp 550 graphite electrode. Many mold factories usually have different allowances for roughing and finishing of copper rp 550 graphite electrode, while rp 550 graphite electrode uses almost the same allowance, which reduces the number of CAD/CAM and machine processing. For this reason, it is enough to improve the accuracy of the mold cavity to a large extent.


Get the Quote

Send Mail Get Quote