rp 600 graphite electrode

Pubdate: 08-11 2021

Revealing the new material of rp 600 graphite electrode

rp 600 graphite electrode

Graphite is very suitable for precision mold manufacturing in the automotive industry due to its light weight, high current resistance and low wear of the rp 600 graphite electrode, and graphitization of the rp 600 graphite electrode is one of the development trends of electrical discharge machining technology. The advantages of the rp 600 graphite electrode are easier processing, high metal removal rate, and low graphite loss. Therefore, more and more mold factories abandon the copper rp 600 graphite electrode and switch to the rp 600 graphite electrode. In addition, some shapes of the rp 600 graphite electrode cannot be made of copper, but graphite is easier to form, and the copper rp 600 graphite electrode is heavier, which is not suitable for processing large rp 600 graphite electrodes. These factors have accelerated the rp 600 graphite electrode. The mold manufacturing industry is more and more widely used.

After the mold factory switched from copper rp 600 graphite electrode to rp 600 graphite electrode, the first thing that should be clear is how to use graphite materials and consider other related factors. Graphite is divided into different grades. In special applications, using appropriate grades of graphite and machine parameters can achieve the ideal processing effect. If the machine operator using the rp 600 graphite electrode uses the same parameter settings as the copper rp 600 graphite electrode, then The result is definitely disappointing, because the melting point of copper is 1083°C, while graphite will sublime at 1083°C. Therefore, the rp 600 graphite electrode can withstand larger machine settings.

If you want to strictly control the material of the rp 600 graphite electrode, you can set the rp 600 graphite electrode in a non-loss state (loss less than 1%) during rough machining, but the copper rp 600 graphite electrode is not used. The rp 600 graphite electrode is easier to process. For example, graphite is processed by milling technology. Its processing speed is 2 to 3 times faster than other metal processing and does not require additional manual processing. The copper rp 600 graphite electrode requires manual grinding. Similarly, if a high-speed graphite machining center is used to manufacture the rp 600 graphite electrode, the speed will be faster, the efficiency will be higher, and there will be no dust problem. In these processes, choosing tools with appropriate hardness and graphite can reduce tool wear and rp 600 graphite electrode breakage. The design of the rp 600 graphite electrode is also different.

Many mold factories usually have different reservations for roughing and finishing of copper rp 600 graphite electrode, while rp 600 graphite electrode uses the same reservation, which reduces the number of CAD/CAM and machining operations. For this reason, it is enough to improve the accuracy of the mold cavity to a large extent. Nowadays, most plastic products are processed by EDM using special grade graphite, which eliminates the process of mold cavity polishing and chemical polishing, but still achieves the desired surface finish. Without increasing the time and polishing process, it is impossible to make such a workpiece with the copper rp 600 graphite electrode.

Comparing the rp 600 graphite electrode and copper rp 600 graphite electrode, the milling time of the rp 600 graphite electrode is 67% faster than that of the copper rp 600 graphite electrode. In general electrical discharge machining, the processing of the rp 600 graphite electrode is better than the copper rp 600 graphite. The electrode is 58% faster, processing time is greatly reduced, and manufacturing costs are also reduced. Switching to full rp 600 graphite electrode discharge machining has many advantages. Therefore, many mold factories are gradually switching to rp 600 graphite electrode EDM processing, in order to improve the competitiveness of enterprises and products in the market.

When the carbon company was founded, it established the development strategy of “science and technology, innovation, and leadership”, adhering to the business philosophy of “quality first, service first”, through technological improvement, quality improvement, and market development, carbon has become a region in Shanxi, Hebei, and Mongolia. The largest graphitization processing company. The main business includes rp 600 graphite electrode, Shijiazhuang rp 600 graphite electrode, and Datong silicon carbide.


Get the Quote

Send Mail Get Quote