rp 700 mm graphite electrodes

Pubdate: 08-11 2021

What are the differences between rp 700 mm graphite electrodes and copper rp 700 mm graphite electrodes?

rp 700 mm graphite electrodes

What is the difference between rp 700 mm graphite electrodes and copper rp 700 mm graphite electrodes? Compared with copper rp 700 mm graphite electrodes, rp 700 mm graphite electrodes have rp 700 mm graphite electrodes with low consumption, fast processing speed, good processability, high processing accuracy, small thermal deformation, light weight, easy surface treatment, high temperature resistance , High processing temperature and other advantages. And solderable rp 700 mm graphite electrodes.

In order to meet the needs of processing simple shapes of rp 700 mm graphite electrodes, conventional turning, milling and grinding methods are usually used. However, in recent years, the requirements for the geometric complexity of rp 700 mm graphite electrodes have continued to increase. The high-speed machining surface quality and high machining accuracy make the high-speed machining of rp 700 mm graphite electrodes a hot spot for mold EDM. Many rp 700 mm graphite electrodes manufacturers have introduced graphite high-speed machining centers. The rp 700 mm graphite electrodes connector is easy to process and the processing speed is significantly faster than the copper rp 700 mm graphite electrodes. For example, when using milling to process graphite, the processing speed is 2-3 times faster than other metals, and no additional manual processing is required, while the copper rp 700 mm graphite electrodes require manual polishing.

Similarly, if a high-speed graphite machining center is used to manufacture rp 700 mm graphite electrodes, the speed will be faster, the efficiency will be higher, and there will be no dust problems. In these processes, choosing the right hardness tool and graphite can reduce tool wear and copper damage. Comparing the grinding time of rp 700 mm graphite electrodes and copper rp 700 mm graphite electrodes, graphite is 67% faster than copper rp 700 mm graphite electrodes.

In EDM, the processing time of rp 700 mm graphite electrodes is 58% faster than that of copper rp 700 mm graphite electrodes. In this way, the processing time is greatly shortened, and the manufacturing cost is reduced.


Get the Quote

Send Mail Get Quote