hp 450 mm graphite electrodes

Pubdate: 08-03 2021

Analysis of molten iron hp 450 mm graphite electrodes and chemical iron hp 450 mm graphite electrodes

hp 450 mm graphite electrodes

The hp 450 mm graphite electrodes for ironmaking, the hp 450 mm graphite electrodes for ironmaking, the hp 450 mm graphite electrodes for ironmaking, and the hp 450 mm graphite electrodes for ironmaking are all made of natural graphite and have excellent thermal conductivity. The hp 450 mm graphite electrodes used for ironmaking should not be placedĀ on the cold metal table immediately after heating to avoid cracking due to rapid cooling. The crucible is suitable for smelting a variety of alloys in small batches. In order to change the alloy type, only the hp 450 mm graphite electrodes need to be replaced. Other smelting methods, such as reverberatory furnaces, crucible-free induction furnaces, etc., are also suitable for smelting a large number of single alloys. If you change the type of smelted alloy without replacing the refractory lining, metal contamination will occur.

The molten iron hp 450 mm graphite electrodes are containers made of graphite and have good high temperature resistance. Industrially, it can be used for metal smelting or casting. For example, you can understand that there are merchants repairing aluminum pots or aluminum pots in rural areas. Their tool is a crucible. They put the aluminum sheet in a crucible and heated it with fire until the aluminum melted the aluminum sheet into aluminum water, and then poured it into the pot. It can be used after cooling. However, the industry uses hp 450 mm graphite electrodes and silicon carbide crucibles. hp 450 mm graphite electrodes have good thermal conductivity, but are easy to oxidize and have a high breakage rate. Compared with hp 450 mm graphite electrodes, silicon carbide crucibles are larger and have a longer service life.

The price of iron smelting hp 450 mm graphite electrodes is generally three times that of hp 450 mm graphite electrodes, and it is also a substitute for crucibles in the metal smelting industry. In order to meet the higher requirements of customers, the company introduced internationally advanced isostatic crucible molding equipment and technology, selected advanced refractory materials, and adopted high-tech formulas to develop a new generation of high-quality ironmaking hp 450 mm graphite electrodes. The product has the characteristics of high bulk density, high temperature resistance, fast heat transfer, acid and alkali corrosion resistance, high temperature strength, and strong oxidation resistance. Its service life is 3 to 5 times that of clay hp 450 mm graphite electrodes.

The products use high-quality raw materials and high-tech formulas. It has low caustic soda content, low iron content, high silicon content, high temperature resistance, strong fire resistance, fast heat transfer, high mechanical strength, oxidation resistance, thermal shock resistance, high density, corrosion resistance, low apparent porosity, and stable chemical properties , Good conductivity, beautiful appearance and durable appearance, it can also produce hp 450 mm graphite electrodes, graphite plates, graphite covers, graphite tubes, graphite pads and other products, and can produce special-shaped graphite products according to user requirements. Non-ferrous metals are necessary tools for casting.


Get the Quote

Send Mail Get Quote