hp 600 graphite electrode
Precautions for using high-purity hp 600 mm graphite electrodes
In the metallurgical industry, high-purity hp 600 mm graphite electrodes have a very wide range of uses. Its main function is to store various liquid metals. As a metallurgical manufacturer, hp 600 mm graphite electrodes will be used. There are some problems, and then we will introduce what problems should be paid attention to in the high-purity hp 600 mm graphite electrodes. I hope that the introduction of the editor will help you who are still confused.
1. High-purity hp 600 mm graphite electrodes are more susceptible to damp. After damp, the products will become soft, and some impact objects will be deformed. Once the water enters the high-purity hp 600 mm graphite electrodes After the inside, it will affect the raw materials in it, it will cause the dilution of the raw materials, and some chemical reactions will further affect its quality problems, so waterproof measures must be done well.
2. Although the high-purity hp 600 mm graphite electrodes are very good in quality and not easy to damage, they must be handled with care. Drops or bumps from high altitude have little effect on the quality of hp 600 mm graphite electrodes, but they are long. As time goes on, there will be cracks. After this happens, there is no way to remedy it, and it can only be replaced.
3. Do not heat the high purity hp 600 mm graphite electrodes on an open flame. Because its thermal conductivity is not particularly sufficient, heating on it is meaningless, and it is unsightly if it is smoked and grilled or scorched underneath it.
Because the high-purity hp 600 mm graphite electrodes have good thermal conductivity and high temperature resistance, they have a small thermal expansion coefficient in high-temperature use, and have a certain resistance to rapid heat and cold. They have better corrosion resistance to acid and alkaline solvents. Strong, with good chemical stability. The high-purity hp 600 mm graphite electrodes have a wide range of applications, mainly used to smelt various silver, aluminum, lead, copper, zinc and other non-ferrous metals, medium carbon steel and rare metals.
The high-purity hp 600 mm graphite electrodes are of stable quality, long service life, greatly reduced fuel consumption, reduced labor intensity, increased labor intensity, and created better economic benefits. The manufacturer has a good production management system and perfection. Product quality assurance system, welcome new and old customers to visit and negotiate business.