rp 250 mm graphite electrodes
Shijiazhuang rp 250 mm graphite electrodes machine tool dust prevention and dust removal
Shijiazhuang rp 250 mm graphite electrodes machine tool dust prevention and dust removal The graphite processing machine tools in the factory can be roughly divided into three categories: ordinary machine tools, processing, and graphite high-speed processing (for space reasons, I will not talk about the need for high-speed graphite here. I will send you a private message) . Ordinary machine tools and processing need to be modified before they can be used for graphite processing.
(1) Ordinary machine tools, including sawing machines, lathes, milling machines, grinders, etc., are designed without dust removal function. Direct use will generate a large amount of dust that will not only harm the health of workers, but also shorten the service life of the machine tool and pollute the workshop. Therefore, it can only be used after dust-proof and dust-removal transformation. Ordinary machine tools have low precision and are not suitable for the finishing of graphite materials.
(2) Machining is generally designed for metal (copper, steel, aluminum, etc.) processing, with high spindle power and strong load-bearing capacity of the machine tool, which is suitable for heavy cutting. After the transformation, the processing range can be expanded to meet the diversified production requirements of small workshops.
A: Transformation of ordinary machine tools
The transformation of ordinary machine tools can be divided into sealing transformation and dust collection transformation. Sealing transformation is to use a cover to seal the dust pollution source partially or as a whole, so that the diffusion of dust is limited to a small enclosed space, and at the same time, a certain amount of air is discharged from the cover to maintain a certain negative pressure in the cover. The outside air flows into the cover through the gaps on the cover to achieve the purpose of preventing pollutants from escaping. Seal modification is mostly used for machine tools with high dust concentration during processing. Dust collection transformation is mostly used for the transformation of ordinary milling machines, lathes, and grinders, because these machine tools are flexible in operation. If the processing area is sealed with a sealing cover, it will hinder the processing operation of the workers, which is not practical or scientific, and the dust collection transformation is a simple and convenient dust removal method. It can be installed very close to the processing area and the dust generated during processing is concentrated, and the dust collection tube can be collected.
B: The processing itself has good sealing performance, and closing the protective door can prevent dust from escaping.
The dust collection tube should be led out from the pipe opening reserved for the machine tool, and try not to lead out from the protective door, so as not to hinder the closing of the protective door. For the transmission system under the workbench, it is difficult to completely seal and prevent dust, and a dust collection tube can be installed near it. At the same time, pay attention to the dust-proof of the spindle, and clean the tool holder when changing the tool to prevent dust from entering the spindle. After each processing, the dust should be cleaned up in time and the processing should be cleaned. When the Carbon Company was founded, it established the development strategy of “Technology and Innovation”, adhering to the business philosophy of “Service First”, through technological improvement, quality improvement, and market development, Carbon has become a graphitization processing enterprise in Shanxi, Hebei, and Mongolia.